Article No. 55025

MTS Turnout Decoder

MTS Turnout Decoder
MTS Turnout Decoder

Most Important Facts

Article No.55025
ManualsCompact viewCopy link
Article not produced anymore.
Check with your local dealer
Find Dealer
  • Product description

    With this decoder you can transmit power and commands through the track for your LGB turnouts, signals, and accessories. You don’t need long, complicated wiring. Just connect them to an MTS turnout decoder and connect it to the track. Features: four sets of output terminals / for each terminal, the output mode can be selected: normal (for turnouts and signals); synchronous flashing (for lights); asynchronous flashing (for lights); on/off (for lights and ­accessories) / adjustable switching duration for normal, synchronous, and ­asynchronous modes. Up to 32 decoders (a total of 128 turnouts, signals, etc.) can be used together in the LGB MTS system. You can control turnout ­decoders with the Universal Remote Controller (LGB 55015) or the MTS Computer Interface (LGB 55060). Notes: The turnout decoder cannot be used with the MTS “analog control” option. / This product is not weather-resistant and should be protected from direct exposure to moisture. For example, you can place it in a model building on your layout. 80 x 70 x 20 mm / 3-1/8” x 2-3/4” x 3/4”.

  • Publications

    - Programme 2009 - Katalog 2009/10 - Catalog 2010 - Catalog 2011 - Catalog 2013 - Catalog 2014


ATTENTION: adults only